TT-1583 9/13a
INSTALLATION INSTRUCTIONS
Original Issue Date:
4/12
Model:
6EKOD/5EFKOD and 9--11EKOZD/7--9EFKOZD Generator Sets
Market:
Marine
Subject:
ADC IId Controller Replacement Kit GM83745
Introduction
These instructions explain how to replace and set up the
controller on the generator set models shown in
Figure 1. Read the entire installation procedure before
beginning installation. Perform the steps in the order
shown. The controller is shown in Figure 2.
Generator Set Model
Controller
Kit Number
6EKOD
ADC IId
GM83745
5EFKOD
9EKOZD
7EFKOZD
11EKOZD
9EFKOZD
Figure 1
Generator Set Models and Controllers
GM58225A
1. LCD display
2. Pushbutton/rotary selector dial
3. Engine start/stop button
4. Power button
5. LED status indicator
1
4
3
2
5
Figure 2
ADC IId Controller
A Note about Controller Setup
After replacing the controller, the installer must set the
controller parameters. On the ADC IId controller, the
installer can use the key sequence described in these
instructions. Use the pushbutton/rotary selector dial to
navigate to the respective menus.
Menus displaying the # symbol represent one of the
following data types:
D
System-calculated data
D
System-measured data
D
User-entered data
Note:
The examples given on the following pages
represent digital displays with the Measurement
Units set to English.
Note:
Some generator set problems can be caused by
incorrect controller settings.
Verify that the
settings are correct.
Parts List
ADC IId Replacement Controller
Kit: GM83745
Qty. Description
Part Number
1
Controller, ADC IId
GM82832
1
Instructions
TT-1583
Safety Precautions
Observe the following safety precautions while installing
the kit.
Accidental starting.
Can cause severe injury or death.
Disconnect the battery cables before
working on the generator set.
Remove the negative (--) lead first
when disconnecting the battery.
Reconnect the negative (--) lead last
when reconnecting the battery.
WARNING
