Operation and maintenance manual RollUP - A02 01-2021
Page
42
to
50
10.6
Test points RollUP -- Before/after each use/application
Function and condition checks must be carried out before and after each use.
In detail, the following must be checked
•
the red base plate and base plate lugs for deformation, cracks and breaks
•
all carabiners for function, deformation, cracks and breaks.
•
tight fit of all riveted joints.
•
all belt edges for cuts and chafing.
•
Suspended belts and carrying handle belts (check label with date of manufacture) for
integrity of seams and damage.
•
Harnesses for stains damaging the fabric and other damage.
•
Damaged and overaged belts, older than 10 years, must be replaced.
•
Damp equipment must be dried by appropriate airing, conspicuous soiling of the belts
must be removed with clean water or a mild detergent solution and brush
•
Do not expose to direct sunlight or direct heat radiation from heating sources.
•
Disinfect with commercially available alcohol-based agents.
Do not use any other chemical cleaning agents or solvents.
Follow the application instructions of the respective manufacturer.
11
Periodic review RollUP - Annual review
11.1
General (to be checked for all components)
•
Check for unobtrusive odor - neutral, (not musty or moldy).
•
Check for dry condition,
•
Check all components for existing and legible labeling (incl. operating instructions).
•
Check for unusual soiling or discoloration due to chemicals or similar.
11.2
Webbing
(carrying handles, vertical belt, horizontal suspension, patient / head / foot straps).
Particularly inspect the sections of webbing that are routed around or within the metal
components (buckles, rings, rigging plate eyelets).
All webbing should be visually inspected for:
