Fig. 9
m)
Refit the front burner heat shield to the sides of the fire box (2 Screws)
and secure the trim to the fire using the magnets provided.
n)
Before making the final gas connection, thoroughly purge the gas
supply pipework to remove all foreign matter, otherwise serious
damage may be caused to the gas control valve on the fire
.
o)
To fit the Evo trim, locate the right hand side flange of the
firebox over and behind the right hand side of the spacer channel, see
fig. 10 overpage.
p)
Locate the left hand side of the Evo trim over the left hand side of the
spacer mounting channel, then lift the Evo trim approximately 50mm
upwards. (see fig. 11 overpage). Push the Evo trim then back to the
mounting face of the fireplace opening and slide downwards and into its
final position. This will locate the Evo trim correctly
Shows correct position
of Foam Seal,
between spacer
channel and mounting
face of firebox
Spacer Channel
15
Summary of Contents for KRDPB0RN
Page 27: ......
