6
Fully charge the battery
To charge the Smart Doorbell, lift the side cover and
insert the Micro USB cable. Connect the other end
of the cable to a 5V power adapter or a USB port to
begin charging.
Pair the Chime
Before mounting the smart doorbell, ensure the device has been
successfully paired to the chime.
Plug the chime into a wall outlet or power socket.
Hold the volume button on the chime for 5 seconds, until you hear a “Ding” sound, which
means it has entered the pairing mode.
With the doorbell held close to the chime, press the doorbell button on the quickly within 8
seconds of the Chime’s “Ding” sound. If successful, you will hear the sound “Ding-Dong”,
confirming the doorbell and chime are successfully paired.
Setting the tone and volume
The doorbell tone will be set to the default when first paired. To change the tone, press the
back or forward key on the chime to cycle through the available options. There are 38 to
choose from.
After settling on your desired tone, hold the volume button for 5 seconds until you hear the
sound “Ding”, then press your doorbell quickly again. It will be paired with your selected
ringtone.
By pressing the volume button, you can cycle through the 5 volume levels.
Reset to default settings
To reset the chime back to default settings, hold the Forward button for 5 seconds until you
hear a “Ding” sound. This confirms that the chime will reset to default settings.
BEFORE FIRST USE
