17
3.
If the existing wires are too short to connect to
the back of your Smart Doorbell, please use the
provided wire extenders and wire nuts. Strip the
wire extender. insert together with the existing
wire in the wire but and twist them together.
Place the Kogan Smart Doorbell into the bracket
Attach the Smart Doorbell to the bracket by inserting the top of the Smart Doorbell into the
bracket and then pressing the button side into the bracket. Tighten the safety screw at the
bottom with supplied an Allen key.
Turn on power with a wired installation (Optional)
Switch the power back on in the junction box back so that there is voltage on your Smart
Doorbell. Test whether your existing chime response to the Smart Doorbell by pressing the
button on the doorbell.
