Kogan NBLTFSLM2DA, User Manual

Page: 6 / 12

•
Before the solar sensor light can operate to its full capacity, the solar panel needs
to be in sunlight for three days to fully charge the battery. Turn the switch to the
“off” position. After the charge, turn the switch to “on” or “auto” position.
• In “Auto” position, the light will turn on automatically at night when motion is
detected by the motion detector head (6).
•
In “On” position, the light can be used as a standard light.
Charging the Battery
• The battery charges via sunlight to the solar panel.
•
The “On” / “Auto” / “Off” switch (8) controls the light. Whether off or on, the solar
panel will still charge if in sunlight, but the light will only function when switched to
“On” or “Auto”.
•
When charging, the solar panel should be facing toward the sun. If the solar panel
is dirty, it cannot charge the battery efficiently.
How to use Switch
OFF
Middle position
When you do not need lighting.
ON
Left position
Light can be used as a standard light.
AUTO
Right position
The light turns on when motion is
detected.
OPERATION