Kogan KAZENTDBATA, User Manual

Page: 25 / 28

Symptom Cause / Issue Solution
The drone batteries are
inserted and the five
indicator lights are
flickering.
Remote control and drone
connection are not successful
Please re-perform the remote
control and the flying drone
connection
The drone batteries are
inserted and the five
indicator lights stop
flickering. The drone has
no response.
Check if the remote control and
the flying drone are powered
on.
Check whether the remote
control and the drone battery
are in a low power state.
Is the battery positive and
negative terminal or placed
correspondingly.
Turn on the remote control
and insert the drone battery.
Use full charged battery.
Reinsert the battery and
confirm that the battery
positive and negative pole
piece of contact is normal.
When the throttle lever
is used, the motor does
not turn and the drone
does not fly. The
indicator light on the
disc starts flashing.
Lithium battery power
shortage.
Charge the battery or replace
with another fully charged
battery.
The drone main rotor
continues to run but
cannot take off.
The main rotor deformation.
Drone battery power shortage.
Replace the main rotor.
Charge or replace the battery
with another battery.
The drone is not level. The main rotor deformation. Replace the main rotor.
The flying drone will still
go on or on after
moving.
The gyroscope is not at all right
Drone engine malfunctioned.
The remote control can be
automatically corrected or
restart the re-frequency.
Ensure that the drone is placed
on a flat ground surface before
take-off. Do not launch the
drone from an incline or from
hand.
The drone was not
stable and fell.
Drone will not take off.
Protective frame is not secured
tightly.
Re-perform assembly and
installation steps, ensuring
protective frame is secured.
TROUBLESHOOTING