Kogan KAZENTDBATA, User Manual

Page: 10 / 28

Remote Control
1. Mobile phone rack
Pull out the remote control lower bracket to clamp the phone.
2. Turning on
Place the drone on a flat surface, and then turn the power switch on. The drone indicator
light will flash.
Turn on the remote control, push the throttle joystick to the highest and then pull to the
lowest. You will hear a “tick” sound. The drone indicator light is on, match the right frequency
to complete (2.4G frequency), then you can take off.
If unable to take off, ensure that the installation and assembly steps have been completed
as specified in this guide. Check that the protective frame is tightly secured to each arm.
3. One key to start; One key to land
Tip: This product is determined by the barometer. In a variety of environmental temperature
and other factors, the drone will automatically start.
One Key landing mode when flying or low voltage. Appear high and low changes are
normal.
OPERATION
One key takes off
One key landing