13
4.
Remove the sponge filter from the waste water tank and check if the float is
caught by any foreign matter.
5.
After removing the sponge filter, rinse the tank with clean water and fully dry it
before reassembling it back in the same way.
6.
A click will indicate the successful installation of the waste water tank.
Emptying dirty water tank & cleaning the filter
1.
Take the floor brush cover off by pressing the snaps as shown in the below image.
2.
Pull the lever at the left end of the rolling brush to remove the rolling brush.
Notes:
•
It is recommended to clean and dry the rolling brush cover and rolling brush timely
after each use to ensure the cleanliness of the machine.
•
Any stains on the nozzle shall be cleans with a wet rag. Do not flush with water.
