30
Sleep mode
If there is no user input for more than 20 minutes, the vacuum will enter sleep mode
automatically. In sleep mode, after the breathing light dims, the machine can be activated
by pressing any button.
Pair or reset Wi-Fi
If the configuration of the Wi-Fi router is changed, the account password is forgotten or the
app fails to connect to the vacuum, you will need to reset the vacuum. Press and hold the
Partial Cleaning and Charging buttons until the voice prompt "Reset Wi-Fi" is heard. The
vacuum is now in pairing mode. Reconnect following the steps in the “Connect to
Smarterhome™ App” section of this guide.
Whole house cleaning
Select “Whole house cleaning” in the app, and the vacuum will enter the whole house
cleaning mode.
Room cleaning
Select “Room cleaning” in the app to add and set rooms, then select the room to be
cleaned.
Fixed
location cleaning
Select the target location using the app, and the vacuum will automatically plan a route
and move to the selected location.
Zoning cleaning
Set up the zoning cleaning function using the app, and the vacuum will clean the
designated area.
Standard mode
The vacuum’s default cleaning mode will be set to Standard mode. Quiet mode, automatic
mode, powerful mode, and mop-only mode can all be set using the app.
Note:
The machine will not enter sleep mode when charging on the charging base.
When entering low battery during sleep mode, the machine will automatically shut
down.
