Kogan KAVAC20TRBA User Manual Download Page 7

- 7 - 

Cleaning the motor filter 

1.  Turn off and unplug cleaner. 

2.  Remove the dust container. 

3.  Release the filter cover and remove it. 

4.  Hold the protective motor filter together with the holder over a 

dustbin. Only then should you separate both parts from each   

other. For a rough clean, gently knock both parts over a dustbin.         

5.  Insert the dry protective motor filter back into its holder. 

6.  Place protective motor filter together with the holder back into its   

receptacle. 

7.  Replace the filter cover by hooking it precisely from above first. 

the engage the lock by pressing it until audibly clicks into place. 

8.  Place the dust container onto the cylinder vacuum cleaner.   

9.  Check whether the dust container is securely seated. 

 

IMPORTANT! Never use the vacuum cleaner without a motor filter. 

 

Cleaning the exhaust air filter 

The exhaust air filter cleans the air a final time before it leaves 

the vacuum cleaner. You can clean the exhaust air filter as follows: 

1.  Switch off the vacuum cleaner and disconnect the plug from 

the mains. 

2.  Open the exhaust air grill (this is at the rear of the vacuum cleaner.)   

3.  The exhaust air filter is visible when the grill has been opened. 

4.  Rinse the filter under cold running water and allow to dry. 

5.  Put the exhaust air filter back into place (or replace with a new one) and place in the grill. 

6.  Close the exhaust air filter grill. 

 

 

 

 

 

 

 

 

 

Transport and Storage 

1.  You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner 

by the cord. 

2.  Before putting the vacuum away, rewind the cord. Switch off the socket, unplug, and press the cord rewind 

button until the cord is fully rewound. 

3.  To save space, the vacuum can be stored upright on its end cover. The telescopic tube can be hung on the 

vacuum cleaner by inserting the parking fixture into the vertical parking holder. 

Cleaning 

Clean the vacuum cleaner by wiping it with a damp cloth. 

You must not use any form of strong, solvent or abrasive cleaning agent. 

Motor protection filter

Summary of Contents for KAVAC20TRBA









Reviews: