- 6 -
USE
Vacuum cleaning
1. Before using the device first roll out a sufficient length of electric cable and plug into the mains socket. The
yellow mark on the electric cable is the maximum length that must not be exceeded.
To switch on the device press the foot pedal button on the casing with your foot
2. To rewind the power cable, press the button with hand or foot and guide the cable with the other hand
to ensure that it does not whip causing damage.
Emptying dust container
Empty the dust container at the latest when the sucked in
quantity of dirt in the dust container has reached the
“MAX”
mark.
1. Switch off the vacuum cleaner and disconnect the plug
from the mains.
2. Release the dust container by pressing down the release
button.
3. Lift the dust container forwards out of the cylinder vacuum
cleaner.
4. When emptying the dust container, hold it low over a dustbin.
5. Press the open button. The base opens and the dust runs into
the dustbin.
6. Carefully knock the remaining dust loose.
7. Close the base.
8. Place the dust container onto the cylinder vacuum cleaner.
9. Check whether the dust container is securely seated.
1
2
3
Summary of Contents for KAVAC20TRBA
Page 1: ...KAVAC20TRBA USER MANUAL...
