Kogan KAUNDMTRNGA, Instruction Manual / Installation Manual

Page: 9 / 16

9
Installation Continued
POSITIONING THE RANGEHOOD
Installation heights
•
Over gas and electric cookers, this rangehood is recommended to be mounted at a height of
between 600–800mm above the cooking surface.
•
Electric cooktops must have a minimum height of 600mm from the underside of the rangehood
to the cooktop face.
•
Gas cooktops must have a minimum of 650mm from the burner to the underside of the
rangedhood.
•
Over open flame grillers or barbecues, the Gas Regulations require the filters of the rangehood
to be at least 1200mm above the cooking surface.
Installing the rangehood
The typical installation method for your undermount rangehood is into a purpose built overhead/
wall cabinet.
•
Using a jigsaw, create the required cut-out for your undermount rangehood:
490mm (W) x
250mm (D).
•
Make sure the cut-out is at least 35mm from the cabinet edge. Please refer to Fig. 4 for the
following points.
•
Remove the grease filter and remove the 4 screws on the fascia panel.
•
Screw the rangehood into the cabinet using 8 screws (supplied).
•
Re-fit the fascia panel with the 4 screws (previously removed).
•
Re-fit grease filter.
Fig. 4
GREASE FILTER
FASCIA PANEL