Kogan KATWSW9IBKA, User Manual

Page: 6 / 12

Syncing
Open the charging dock case and remove the earbuds.
After removing the earbuds from the case, they will automatically power on and pair to each
other. A voice notification will signal that power is on (“Power on”), that the earbuds are
synced (“TWS connected”), and that the earbuds are looking for a device to connect to
(“Pairing”).
Ensure both earbuds are removed simultaneously to ensure successful pairing.
Pairing with a smart device
Once successfully synced, the earphones are ready to pair with your Bluetooth enabled
device.
Turn on the Bluetooth function on your device (computer, smartphone, etc) and search for
the earphones in the Bluetooth menu. The earphones will appear as “KOGAN W9 TWS” in
Bluetooth menu. Once selected, the earphone status LED will flash blue, and you will hear a
voice notification when pairing is successful.
Once the connection is successful, you can start using the wireless earphones.
To disconnect, simply put the earphones back in the charging case and the earphones will
automatically disconnect from any paired devices.
To reconnect the earphones with the same device, remove the earphones from the charging
case and the earphones will automatically connect to your device. Ensure that the
Bluetooth function on your device is turned on.
To prevent the earphones from automatically connecting to a device, remove the earphones
from the Bluetooth menu of that device.
To enjoy calls, music and audio output from your device to the earphones, ensure that the
media connection for both calls and media files is activated in the Bluetooth menu.
OPERATION
Open
Remove
Note:
Ensure both the charging case and the earphones are fully charged before first use.