Kogan KATWST3PLHA, User Manual

Page: 7 / 12

Power On/Off
•
To power on the earphones, simply remove the earphones from the charging case.
The earphones will automatically turn on if they are charged.
•
To power off the earphones, put the earphones back in the charging case.
•
If the earphones do not power on, they require further charging.
Interpairing the Earphones
• Ensure that the earphones are sufficiently charged.
•
Remove both earphones from the charging case. The earphones will turn on and
enter the automatic interpairing mode. Wait a few seconds as both earphones pair
with each other. You will hear a prompt tone when the connection is successful.
Earphones are normally interpaired within 3-8 seconds.
• To reactivate interpairing mode, simply put the earphones back in the charging
case, wait a few seconds and then follow the above procedure again.
Using Left or Right Earphone Individually
•
It is possible to use just one earphone at a time. To do this, the interpairing steps
above can be skipped.
• Remove the selected earphone from the charging case, while leaving the other in
the case. Close the case.
•
The single earphone will turn on and enter the automatic interpairing mode, but
not connect to the other earphone.
• It will then be ready to use, with only left or right audio depending on the earphone.
Bluetooth Pairing and Connectivity
After the interpairing is successful, the earphones are ready to pair with your Bluetooth
enabled device.
• Turn on the Bluetooth function on your device and search for “T3 Pro” in the
Bluetooth menu. Select “T3 Pro” and you will hear a prompt tone when pairing is
successful.
• Once the connection is successful, you can start using the wireless earphones.
•
To disconnect, simply put the earphones back in the charging case and the
earphones will automatically disconnect from any paired devices.
• To reconnect the earphones with the same device, remove the earphones from
thecharging case and the earphones will automatically connect to your device.
Ensure that the Bluetooth function on your device (computer, smartphone, etc) is
turned on.
OPERATION