Power source
This soundbar is designed to operate on normal AC power source. For Australia and New
Zealand, it operates only under SMPS 110V-240V~50Hz/60Hz. Do not attempt to operate
the soundbar on any other power source, as this may cause damage to the product that is
not covered by your warranty.
Important notes
•
This soundbar is especially developed for LED/LCD/Plasma TVs. It should not be
used in combination with CRTTVs (Cathode Ray Tube TVs) in order to avoid image
interference.
•
Do not install the product in the following areas:
o
On top of other stereo equipment that radiate heat.
o
Blocking ventilation or in a dusty area.
o
Near candles or other flames.
•
Before turning on the power for the first time, make sure the soundbar is plugged
into a power outlet.
•
For safety reasons, do not remove any covers or attempt to gain access to the
inside of the product.
•
Do not attempt to remove any screws or open the casing of the unit.
