Notes:
•
If your pairing device is switched off or manually disconnected, the soundbar will
automatically enter pairing mode.
•
The connection to the device will be re-established once you re-enter wireless
range (10m). To connect to other devices, repeat the above pairing steps.
•
There is no automatic shutdown in pairing mode. The soundbar will remain in
pairing mode even if no device is paired, so switch off if not in use.
AUX mode
•
Connect the soundbar to your PC, tablet, smartphone, TV or other device using a
3.5mm audio cable. Press the input button to switch to AUX input mode.
•
In this mode, playback can only be controlled from your connected device.
Note:
For some computers, you may need to access the audio control panel to manually set
the soundbar as shown in the below picture.
Playing audio via USB port on soundbar
The soundbar automatically switches to USB input mode on the LED display when a USB
flash drive is inserted. This mode isn’t selectable on the soundbar or remote control unless a
USB flash drive is connected.
1.
Ensure that your USB flash drive contains MP3 or WMA audio files (other file types
not supported).
2.
Connect the USB flash drive to the USB port on the soundbar (or your own USB
extension cable connected to the USB port); music will automatically play.
3.
Control media playback from the soundbar’s remote control.
Audio input
Audio output
