Operation
Startup
Note: if this is the first time using the projector, please read the “installation” section in this
manual before use. To connect the signal cable and power cable to the projector, following this
operating process. Before starting the projector, please connect the external device (such as the
PC, Blu-ray player etc...)
1. Please place 2 x AAA batteries into the remote control before use.
2. Connect the power cable to the power jack. The indicator light should turn red. Remove
the lens cap.
3. Press the POWER button on the remote control until the panel indicator lights up.
4. After 2 seconds, the projector should start up.
5. The projected image may be blurry or in the shape of a trapezoid. Please read the “How
to adjust the trapezoidal image” chapter to adjust.
6. Once the image becomes clear, the user can watch their desired selections. The system
parameters of the project can also be set by reading the “Guides for Menu Setting”
chapter.
8
Summary of Contents for KAPROFHDXXA
Page 13: ...13 ...
Page 15: ...Specifications 15 ...
