•
Do not put the power bank in high temperature environment such as fire, or use near
flammable gas, steam or dust. Illegal operation may cause battery explosion and
endanger safety.
•
All products have been fully inspected. If you find that the power bank is overheated,
deformed, damaged, scratched or other abnormal phenomena during use, stop using it
immediately.
•
At 25°C, the product is fully charged and then discharged to the cut-off point for 300
consecutive cycles until the discharge capacity is less than 60% of the rated capacity,
indicating the end of the service life of the mobile power supply.
•
According to the requirements, service conditions and service life conditions, the
products should be used reasonably. The products should be charged and discharged
once every six months. The products that meet the service life conditions should be
scrapped and discarded in time.
•
If not using for a prolonged period of time, ensure the power bank is charged every six
months.
•
The products used frequently in humid, low temperature and high temperature
environment shall be scrapped within 18 months and disposed in time. Under normal
use and maintenance, it is suggested that the product should be scrapped within 24
months and disposed in time. If it still needs to be used, it needs to be certified by the
relevant professional certification organization and the longest use time of the product
should not exceed 36 months.
Disclaimers
The equipment damage and safety problems caused by any of the following points are not
within the scope of the warranty and responsibility of manufacturer.
•
Damage caused by not following the operation instructions and safety warnings in the
specification.
•
Damage caused by operation in harsh environment beyond the specification.
•
Damage caused by storage conditions not meeting the requirements of this
specification.
•
It is forbidden to apply or operate beyond the conditions described in this specification.
If the customer needs, he / she should contact manufacturer technology in advance. In
this case, additional experiments are required to verify the performance and safety.
Summary of Contents for KAPDPBQC20A
Page 1: ...20 000 MAH 18W PD POWER BANK KAPDPBQC20A...
Page 2: ......
