Insert one end of the HDMI
c
able into your PC
’
s graphics card. A VGA cable may also
be used.
A
VGA
c
ables
is
not
inc
luded
.
1
.
Connect the other end of the cable to the corresponding connector on your monitor
.
VGA
Connector
HDMI
Connector
2
.
Connect the power cable to your monitor then connect the other end to your power
source
.
It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly
.
3.
Locate the power button on the monitor and press it to turn the monitor on
.
Solid blue light indicates power is on and the monitor is operating normally
.
Flashing blue light
indicates no video source has been detected
.
Red light indicates that no horizontal or vertical
signal has been detected or voltage is low
.
Please ensure your computer is on and all video
cables
are fully inserted
and
/
or
c
onnected
.
Indicator
Light
Indicator Light
Basic Operation
10
