Kogan KAMERSUVBKA, User Manual

Page: 8 / 16

Step 5: Charging instructions
Before installing the seat, connect
the power terminals, and then place
the seat into the slot on the vehicle
body. Affix the seat in place with
screws on both sides as shown.
To charge, open the cover and then
insert the charging adaptor into the
slot below the seat. Only charge the
vehicle when it is not in operation.
Step 6: Remote control battery installation
Use a screwdriver to remove the
screw on the battery cover, then the
battery cover itself. Insert two AAA
1.5 V batteries, replace the battery
cover, and screw it back into place.
Refer to Remote Control section for
instructions on pairing.
Chair
Safety belt
Charging seat
2x AAA 1.5V
Battery cover