The beverage cooler should be cleaned regularly. Ensure the beverage cooler is set to the
OFF temperature mode or is unplugged before cleaning.
Interior
The interior of the cellar should be cleaned regularly to avoid odour.
•
Remove any drinks and shelves inside the beverage cooler.
•
Combine two tablespoons of baking soda with one litre of warm water. Using this
solution, clean the interior with a soft cloth or sponge.
•
Leave the door open and allow the interior to dry.
Shelves
Clean the shelves with a soft damp cloth with soapy water or diluted detergent. Rinse with
water and let dry.
Exterior
Wipe the outer surface of the cellar with a soft damp cloth with soapy water or detergent
then wipe dry.
Clean any dust behind and around the area of the beverage cooler. This will ensure optimal
cooling performance and minimise the amount of energy used
Check and clean any debris on the gasket of the door with a soft damp cloth and soapy
water or diluted detergent.
CLEANING & CARE
Note:
For hard-to-reach areas (for example, corners, narrow gaps), wipe with a soft brush.
Note:
Do not use harsh chemicals (for example, soaps, detergent, spray cleaner) as these
may cause odours in the interior and cause beverage contamination.
Notes:
•
Do not rub or scratch the surface of the glass door.
•
Do not use hard brushes, steel balls, wire brushes, harsh abrasives, organic
solvents (for example, alcohol, acetone, banana oil), boiling water, acids, or
alkaline to clean the beverage cooler.
Summary of Contents for KAM43BEVFGA
Page 1: ...BEVERAGE COOLER 43L 93L KAM43BEVFGA KAM93BEVFGA...
Page 2: ......
