Display
When powering on the refrigerator for the first time, the display screen will light up fully for 3
seconds, then run according at setting 3.
Temperature setting
Each time the temperature setting button (A) is pressed once, the temperature setting
changes one time. After the temperature setting has been completed, the refrigerator will
run according to the set value after 15 seconds.
The shift regulation is:
Lock/Unlock
When the temperature control panel is in lock state, ii needs to long press temperature
setting key for 3 seconds for unlocking the panel, all LEDs will blink for 2 seconds when
panel is unlocked. When the temperature control panel is in unlock state, if there is no
operation on control panel within 15 seconds, it will enter lock state automatically.
Damper adjusting slider
The initial position of the damper adjusting slider is on the far-right side.
For better user experience, it is recommended to push the slider to right position and press
the Setting button to Temp 2 position. If it is not enough cool inside the refrigerator
compartment, check the slider to ensure the position is set correctly.
Setting 1
Setting 2
Setting 3
Setting 4
Coldest
