Quick Start Guide
Connection
1.
Connect the mains power and the antenna cable.
2. If the TV has a power switch, turn it on. Then press the POWER button on the remote to turn the
TV on.
First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic
settings.
•
OSD Language
Press to select the desired OSD (On Screen Display) language.
◀▶
•
Country
Press to select the country you are in.
◀▶
•
Auto Scan
Press to select the the mode (DTV+ATV, DTV, ATV)
◀▶
•
Auto Channel Update
Press to select ON or OFF.
◀▶
Turning TV On and Off
•
Turn TV on
Connect the power cable. If the TV has a power switch, turn it on. Press the Power button on the
remote control to turn the TV on from standby mode.
•
Turn TV off
Press the Power button on the remote control to put the TV into standby mode.
Do not leave your TV in standby mode for long periods of time. It is best to unplug the power cable
and antenna cable if the TV will not be used for an extended period of time.
•
No Signal
There will be a No Signal menu on the screen if there is no valid input signal. In DTV mode, if there
is no signal for 15 minutes the TV will turn off automatically. In PC mode, the TV will turn off
automatically after 1 minute of receiving no signal. When a VGA cable is connected, the TV will turn
on automatically.
Programme Selection
•
Using CH+/CH- on panel of TV or on the remote
•
Press CH+ to increase the channel number.
•
Press CH- to decrease the channel number.
Using 0-9 digital buttons
•
You can select the channel by pressing 0 to 9 (in DTV mode).
Example: To select channel 9, press 9. To select channel 22, press 22 in succession.
Volume Adjustment
•
Press VOL+/- to adjust the volume.
•
To completely turn the sound off, press the button.
•
To cancel mute, increase the volume or press the button again.
Changing the Input Source
•
You can select the input source by pressing the SOURCE button on the remote control. Press
▲▼
to cycle through the input sources, then press ENTER to confirm your choice.
9
Summary of Contents for KALED55XXXTA
Page 1: ......
Page 8: ...Remote Control 7 ...
