Kogan KALED55UHDZC, User Manual

Page: 14 / 38

Basic Operation
Turning the TV on and off
1. Insert the power cord into a power outlet.
2. If the TV is in standby mode, press the POWER
button on the remote control or the “ ” button
on the bottom panel of the LED TV.
3. Normal picture will be displayed on the screen
after approximately 15 seconds. If no signal input is
detected, “NO SIGNAL” will be displayed on the screen.
4. If temporary power off is required, press the POWER button on the
remote control or the “ ” button on the bottom panel of the LED TV.
5. If you want to completely switch off the power to the unit, unplug the
power cord from the wall completely.
6. After switching the unit off, you should wait at least 5 seconds before
switching it back on.
Status Indication Lamp
Red: standby mode
Green: power on
Auto Power-off
1. If there is no signal, the TV will automatically enter standby mode after 10
minutes.
2. In VGA mode, if there are no operations after 15 seconds, TV will enter
standby mode.
Memory before turning TV off
The picture and sound settings and preset channels will be memorised at the
point when the TV is turned off. When the TV is starting up again, it will come
on with these settings again.
Main Interface
You will enter the main menu once the TV is turned on.
13