Product Layout
1. Lid
2. Spout
3. LED Display
4. Handle
5. Power Base
Product Specifications
Rated Voltage: 220-240V 50~60Hz
Rated Power: 1850 – 2200W
Capacity: 1.7L
Dimensions: 22.8 x 15.1 x 25.4cm
Weight: 1.31kg
Usage
For the first time use, or after a long absence of use, it is recommended that you fill the
kettle to the maximum mark with fresh tap water, boil the kettle and then empty it of
the water. Repeat these steps at least two times to clear the kettle of any dust. Do not
drink the discarded water.
1. Pull up the lid handle and the lid will open.
Remove the kettle from the base and take it to the tap. Fill the kettle with the
desired amount of fresh water, ensuring that it is no lower than the minimum
amount and no higher than the maximum level. Put the lid back and place the
kettle back onto the base unit.
2. Connect the plug to a power outlet and the LED display should light up.
Press the LED display once to put the kettle into heating mode. If you press the
LED display again, it will go into keep warm mode. A third press of the LED will
turn the kettle off. The LED display will go blank.
2
