Kogan KAHPH24WLSA, User Manual

Page: 9 / 11

6. The FM signal reception depends on environmental conditions. If the desired
station cannot be received without noise or interference, try changing your location.
The last tuned-in station will not be saved when changing the operating mode or
after powering the headphones off. To use the built-in FM tuner it is not necessary to
power the transmitter cradle on. You may turn it off by pressing the On/Off button
Using the Headphones with a Cable
If your location is close to the audio source and you don’t wish to make portable use
of your headphones, you may use them with a normal cable connection. In this case
you don’t need the wireless capabilities of the transmitter cradle.
For cable operation, use one of the supplied audio cables (see page 1 – Package
Contents).
1. Music output via the audio cable is possible while the headphones are powered
off. To save battery power, press the On/Off button (10) to power the headphones
off.
2. Connect one end of the audio cable to the audio input socket (6) of your
headphones. Connect the other end of the cable to the headphones output socket of
your hi-fi equipment.
If your hi-fi equipment has a 6.3 mm stereo socket, connect the adapter plug (see
page 1 – Package Contents) to the cable. You may also connect the adapter cable
(see page 1 – Package Contents) to the cable to use any of the Cinch audio outputs
of your hi-fi equipment.