Kogan KAHPH24WLSA, User Manual

Page: 6 / 11

11.When you used up the power stored the Li-battery, and then you want to continue
to listen to the music, you can insert two AAA batteries into the battery compartment
which is located on the left of the receiver. Make sure you match the correct polarity.
Note the + and – icons on the batteries and inside the battery compartments.
12.Slide the left function switch to the “DC2” position to switch to battery mode.
13. To switch between conventional batteries and internal rechargeable battery
operation, you must select the proper position with the function switch . Position
"DC1" represents internal rechargeable battery operation. Position "DC2"
represents conventional battery operation.
14.Please note the receiver will sound an alarm when the battery power is low, and
you will need to replace the batteries.
15. If the Li-battery power gets below 2.7V (which is not enough to use the
headphones, so receiver will protect the Li-battery by turning off power and
conducting at low voltage). Put the left button of the receiver to OFF, then put the
charging piece of the receiver on the needle of the transmitter.
The transmitter will now charge the receiver automatically.