Kogan KADABBTTBLA, User Manual

Page: 26 / 36

Chapter 4 FM Mode
4.1 General Operation
1. Press MODE repeatedly until < FM Radio > is showing up.
For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.

Note: or enter < Main menu >, and then turn
SCROLL
to < FM >, press
SCROLL
to confirm
.
4.2 Scan Setting
•
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
•
To change the scan settings to stop only at stations with good signal strength, press MENU

< Scan setting >

Strong stations only?

Yes , press SCROLL to confirm.
4.3 How to Scan
1. To manually adjust frequency , while frequency shows up,turn SCROLL to adjust it by
0.05MHz per step.
2. To auto-search , while frequency shows up, simply press SCAN/ .
4.4 Audio Setting
•
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in
a poor signal-to-noise ratio (hiss).
•
To play weak stations in mono, press MENU  < Audio setting >  Listen in mono
only?  Yes , press SCROLL to confirm.