Assembling the detector
1.
Insert the latch on the top of the handle into the assembly hole on the bottom of
the control box. Slightly push the control box in the direction of IN marked on the
handle to fix the latch in place. Secure the control box in place with the fixing
screw.
2.
Unscrew the fixing knob on the search coil and remove the knob connector. Place
the washers into the groove of the lower stem. Insert the stem and align the holes
on the search coil bracket and the stem. Push the connector through the holes and
tighten the knob.
3.
Press the silver button in the middle stem and slide the stem into the upper stem.
4.
Press the silver button in the lower stem and slide the stem into the middle stem.
ASSEMBLY
Fixing screw
Latch
Control box
Assembly hole
Lower stem
Fixing knob
Washer
Search coil
Connector
Washer
Groove
Summary of Contents for KA3MTANDETA
Page 1: ...300MM DEEPTARGET WATERPROOF METAL DETECTOR KA3MTANDETA ...
Page 2: ......
Page 19: ...NOTES ...