Pinpointing the target
Accurately pinpointing a target makes digging it up easier but takes practice. It is suggested
to practice finding samples on one’s own property before searching other locations.
Follow these steps to pinpoint a target:
1.
When the detector detects a buried target, continue sweeping the search coil over
the target in a narrowing side-to-side motion.
2.
Make a visual note of exact spot on the ground where the detector beeps.
3.
Stop the search coil directly over this point on the ground, then move the search
coil straight forward away from you and straight back towards you a couple of
times.
4.
Repeat steps 1~3 at a right angle to the original search line and mark an “X”. The
target will be directly below the “X” at the point of the beep response.
Summary of Contents for KA3MTANDETA
Page 1: ...300MM DEEPTARGET WATERPROOF METAL DETECTOR KA3MTANDETA ...
Page 2: ......
Page 19: ...NOTES ...
