2.
Place the right pedal (marked R) on the right side crank arm and the left pedal
(marked L) on the left side crank arm. Note the pedals are not interchangeable:
incorrect installation may cause damage.
Thread the right pedal clockwise and the left pedal anticlockwiseonto their
respective arms. Once hand tightened, use the supplied spanner to completely
tighten the pedals.
3.
To insert the table post, turn the adjustment knob anticlockwiseto loosen.
Pull the knob outward and insert the post at the same time until the table post is
fully inserted.
Release the knob and slowly pull up on the post until it locks in place. Verify that
the post will not move up or down.
Tighten the knob by turning it clockwise until it is completely tightened.
