29
4. After communication, unplug the MINI USB cable.
7.9.2 MS ACTIVESYNC
1. Tap
in the system interface to enter
USB Option
as shown below.
Select
MASS ACTIVESYNC
and tap
to save the setting.
2. Install the application
Mobile Device
in a drive of PC. Then the following icon will
appear in the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the GPS
navigator and the standard USB terminal to the USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device drive in the selection
area to enter the memory of GPS navigator for data transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety back up the navigator data. We assume no responsibility for
data loss or damage