1.
Press and hold the MFB for 2 seconds to power the headphones ON. After 5s, the
LED indicator will flash blue and red alternately indicating that pairing mode is
active. The headphones will power OFF after 5 minutes if no Bluetooth device is
connected.
2.
Activate Bluetooth on your phone (or other device) and set it to search for new
devices.
iPhone Settings > Bluetooth > On
Android Settings > Bluetooth > On > Scan for devices
NOTE: Menus may vary by device.
3.
Select “Kogan EC65 II Pro”.
If prompted for a passcods, enter four zeros (0000) and accept the connection.
Once successfully paired, the LED indicator will flash blue.
•
Two Phones Connection: Your headphones can pair with two devices simultaneously. After
you connect with Phone A, turn the headphones and Bluetooth on Phone A off. Then
restart the headphones and pair with Phone B and maintain the connection with Phone B.
Finally, open Bluetooth on Phone A and select “M1” in the menu.
Note: The headphones can only play music from one device even if two phones are
successfully connected at the same time.
•
Wired connection: Use the included audio cable to connect. Bluetooth, battery, controls
and microphone are disabled automatically in AUX mode.
Noise cancellation
Press ANC button once to activate active noise cancelling. The LED will turn green.
Press once again to disable the ANC function, and the LED will switch off.
Charging
Wired charging: Plug a Micro USB cable into the headphones’ charging port and connect
the other side with a USB wall charging adapter or computer. The LED indicator turns red
while charging and turns blue when fully charged.
The headphones will sound a “low battery” warning every 15 minutes when the remaining
charge is below 10%.
Avoid using the headphones whilst charging is in progress.
OPERATION
Summary of Contents for EC-65 II
Page 2: ......
