Kogan 8KG Series, User Manual

Page: 15 / 28

Program End
•
All drying programs will end with a 10-minute cooling phase.
•
If the laundry is not removed at the end of the cycle, the dryer will run an anti-
crease phase – the default duration is 30 minutes and it can be set up to 120
minutes.
•
If the laundry is not removed at the end of the Anti-Crease phase, the display will
show “End” and the buzzer will sounds for 15 seconds if enabled. To finish, turn the
program selector dial to off.
Child Lock Function
Press and hold “Time” and “Dry Level” together to toggle the child lock function on or off.
With the child lock active, only the Off button will function.
The function will be cancelled if the door is opened during operation if the filter drawer is
removed during operation or if the water tank becomes full.
After Use
•
If the drying program has to be stopped before it reaches the end, it is recommended
to run the cooling phase before removing the laundry so excess heat can dissipate.
•
Turn the dial to “Off” and then to “Refresh” before pressing the “Start” button.
•
Ensure the filter is cleaned after every cycle.
Modifying the Program
To change a program while the dryer is running, first cancel it by turning the program
selector dial to “Off”, then select the new program and press the “Start” button.
Child Lock