MJ400080F1
III. Cautions
(1) Avoid water pressure exceeding the specified value and cleaning with reverse flow, which will
damage the sensor portion and cause failure.
(2) If measured fluid in the tube hole is frozen, the sensor portion may be damaged. If there is the
possibility of freezing, take heat insulation measures.
(3) FM01 series including threaded portion is made of resin. Excessive tightening when fitting and
unnecessary external force must be avoided.
(4) Do not hold the output cable when carrying the product. The soldered connection of the cable
and electronic circuit may be damaged.
(5) The circuit portion must not be subjected to dew condensation.
IV. Insulation resistance/dielectric strength test
The insulation resistance/dielectric strength test must not be conducted because there is the
possibility of the electronic circuit being damaged.
■
Warranty
1. The contents of warranty
①
Warranty period
The warrant period shall be one year after the shipment.
②
Warranty range
If a malfunction of the product you purchased occurs because of our responsible reasons, offer of
substitute or it will be charge-free repaired in our factory. But if a malfunction of the machine occurs
due to the following reasons, even within the warrant period, it becomes the outside for a warranty.
(a) Malfunctions due to erroneous applications, repairs or remodeling.
(Including the case in which the manufacturing specification differs from the application conditions.)
(b) Malfunctions due to the falling after the purchase.
(c) Malfunctions caused by natural disasters such as fire, earthquake, water disaster and lightning
stoke, or riots or wars.
(d) Malfunctions caused by mixing-in of foreign matters out of the piping.
(e) Malfunctions caused by the peculiar problems due to combinations with other built in equipment.
In addition, a warranty here means the warranty of the product simple substance of our company. So
the damage induced by failure of the products of our company shall be eliminated from the object of
warranty.
