Page 18
Version 02-2010
LHR-2
Operation
Working position – FRONT ATTACHMENT
The operating speed can be infinitely ad-
justed by twisting the twist-grip A.
Driving forwards (fig. 6)
Turn twist-grip A clockwise.
Driving in reverse (fig. 7)
Turn twist-grip A anticlockwise.
Stop
Turn twist-grip A to the 0 position.
Easy-Drive shift
Electrical speed adjustment - OPTION -
CAUTION!
Before depressing the clutch/safety stop lever, the green LED must light up on the rocker switch
with the engine running!
The operating speed can be infinitely adjusted by pressing the rocker switch.
Driving forwards
Press the rocker switch at the front for a short or long period.
The longer you press, the higher the speed will be.
Driving in reverse
Press the rocker switch at the rear for a short or long period.
The longer you press, the higher the speed will be.
Stopping
Press the rocker switch in the opposite direction until the ma-
chine stops moving
or
press the STOP pushbutton – the machine
is brought slowly to a halt
or
release the clutch/safety stop lever (EMERGENCY STOP) - the
drive is stopped immediately!! The actuating cylinder on the
pump returns automatically to the 0 position. The LED on the
rocker switch must light up green.
Note that the engine must continue to run.
F
ORWARD AND REVERSE DRIVING
Working position – REAR ATTACHMENT
FORWARDS
REVERSE
Twist-grip A
Direction of
travel
Direction of
rotation
Twist-grip A
Direction of
travel
Rocker switch
Forwards
Reverse
Fig. 6.
Fig. 7.
Engine at rear
Direction of
rotation
Green LED
Pushbutton
STOP
Rocker
switch F/R
Direction of
travel
Fig. 8.