•
Guide the right and left sides of the 5-point harness through the
openings on both sides of the seat and attach them to the frame
using the hooks on the metal D-rings. Picture 19
•
Adjust the straps of the 5-point harness to the correct size for your
child using the various adjustment options. Picture 20
•
Place the 5-point harness around the waist and shoulders of the
child, fasten the buckles correctly and re-confirm that all parts of
the safety belt are correctly positioned and secured.
•
Squeeze the buckles to open them again. Picture 20
•
Always use the 5-point harness!
•
Using the snap, fix the crotch strap around the fastener of the 5-
point harness. WARNING: if the crotch strap is fastened around the
cross bar, you will need to release it first before folding the Flexxo.
•
Assembly of the hood: slide the hood brace through the hood and
fasten the snaps on the hood to the hood brace. Picture 21
•
Click the hood brace into the plastic holders on the frame. Picture
22
•
Place the straps of the hood around the handle bar above the
handle-bar adjustment latch, Picture 23 and pull the strap through
the buckle and close the Velcro (somewhat tightly). Close the
zipper over the strap so that it is no longer in view. Picture 24 By
pushing the hood forwards a bit more you can obtain a nice smooth
hood.
ADJUSTING THE BACK REST
To bring the back rest from the sleeping position into the sitting
position, tilt the back rest upwards slightly and then pull the adjustment
strap until the back rest reaches the desired position. Picture 25 Never
adjust the back rest when a child is in the Flexxo.
INSTALLING THE CROSS BAR
•
Disassemble the plastic part on one side of the cross bar. You do
this by pushing in the silver button. Picture 26
•
Place this plastic part in the opening on the side of the frame.
Picture 27 Do the same with the other plastic part of the cross bar.
Be careful not to damage the frame.
•
Now push the cross bar back into the first plastic part. Picture 27
•
To fold the frame, you will need to fold the cross bar to its inward
position. Picture 28