Kody Technologies LLC
Bike Rack Light
–
Thule XTR Pro
Kody Technologies LLC
Protect Your Ride
Davis CA, 95618
Installation Instruction
Model #: 130-010
1.
The rack light bracket installs between the rear
most bike tray and the frame. It uses the existing
rack hardware, fits cleanly and does not affect
any tray left or right adjustment.
2.
For Install after Rack Assembly:
Remove the two rear most screws holding the last
tray in place and loosen the front most screws to
make space for the bracket.
For Install During Rack Assembly:
Start securing the last tray to the rack by installing
the front most screws into the tray.
3.
Set the bracket in place between the tray and the
frame. Position the light centered on the frame.
Adjust bike tray to desired location.
4.
Install the rear most screws and tighten all four
screws while keeping the light centered on the
frame.
5.
Route cable along the length of the bike rack and
secure with the provided cable ties. Bike racks
have many pivot points. Be sure to route the
cable away from and around pivots to keep them
from getting pinched.
6.
Connect the light to your vehicle
’
s power supply
and test all light functions (tail, brake, hazard,
left and right-hand turn signals).
7.
If turn signals do not function correctly on your
vehicle, please see the
“How to”
page on our
website for LED Trailer Lights or contact us.
Any questions, ideas, or concerns? Please contact us
at
Remove x2 and Loosen x2
Light Set in
Place and
Centered
Light Centered and Tightened
Cable Routing
