8
IMPORTANT: When you have finished using detergent,
always follow the Cleanup Instructions. Failure to clean
properly will cause the injection system to become
clogged and inoperable.
CAUTION: This machine has been designed for use
with pressure washer detergents only. The use of other
detergents or chemicals may affect the operation of
the machine and will void the warranty.
NOTE: To apply detergent, the black coloured
detergent nozzle must be used to activate the low-
pressure detergent injection system.
DETERGENT OVERVIEW
To enhance the efficiency of the pressure washer,
sometimes it is necessary to use detergents to help
loosen tough dirt and grime.
WARNING!
•
Never use bleach, chlorine products and other
corrosive chemicals
•
Never use liquids containing solvents (i.e. paint
thinners, gasoline, oils)
•
Never use tri-sodium phosphate products
•
Never use ammonia products
•
Never use acid-based products
These products can cause physical injuries to the
operator and irreversible damage to the machine
and/or damage the surface being cleaned.
STEP 1
Place the suction hose into a container of pressure washer
detergent.
STEP 2
Pull back the collar on the spray lance to insert the
detergent nozzle. (see page 7)
STEP 1
Insert detergent suction tube into a clean container (not
supplied) with one gallon (4L) of fresh water.
STEP 2
Pull back the collar on the spray lance to insert the
detergent nozzle (see page 7).
STEP 3
Turn the adjustment knob counter-clockwise to open and
meter the desired amount of chemical injection.
STEP 4
With the motor running, depress the gun trigger to apply
detergent to the work area, DO NOT allow detergent
to dry.
STEP 5
After applying detergent, turn adjustable knob clockwise
to close off the detergent chemical injector.
STEP 6
Release the gun trigger and attach one of the high-
pressure nozzles.
STEP 3
Turn the adjustment knob counter-clockwise to open and
meter the desired amount of chemical injection.
STEP 4
With the motor running, press and hold the gun trigger for
one minute or until the container of fresh water is empty.
STEP 5
After siphoning the water, turn adjustable knob clockwise to
close off the detergent chemical injector.
STEP 6
Release the gun trigger and attach one of the high-
pressure nozzles.
DETERGENT APPLICATION
CLEANUP INSTRUCTIONS
WORKING WITH DETERGENT
