Copyright 2013, Kodiak Networks, Inc.
kodiaknetworks.com
6
2.
Getting Started
The following topics give you all the information needed to set up your phone for the first time.
Setting Up Your Phone:
Refer to the following sections to insert and charge the battery and set up the phone. To change the
battery you can use the key supplied along with the device, in the absence of the key you can also
use screw driver.
Inserting the Battery:
Complete the following steps to insert a Carbonado battery into your UA400 phone.
1.
Rotate both battery cover screws in counter
clockwise direction (as shown in the figure).
You can use a key/screwdriver set.
Sometimes the screws may be tight and
extra effort is required to open them.
2.
Lift the battery cover to view the
battery slot.
3.
Insert the battery and push it into the battery
slot such that the three metallic contacts at
the bottom of the battery are aligned with the
metallic
contacts
within
the
battery
compartment.
4.
Close the battery cover. Rotate the battery
cover screws in clockwise direction. You can
use a key/screwdriver to tighten the screws.
Ensure not to over tighten.
