9
STEP 3: Awning Set-up
1) Join awning poles. Place the tip of the awning pole through the corner grommet at the end of the
awning.
2) Tie a small loop in the end of the guyline. Place loop over the tip of the pole. Stake the guyline. Adjust
the clasp so guyline is taut. Repeat on other side.
Tips:
Slant awning down and away from tent so rain will drain away from tent.
When stowing, roll awning down and under so water will run off and not pool on the roll. This
is best done with two people.
In strong wind or heavy snow conditions, roll and stow awning.
Special Features
● Funnel-flow vents (Models 6010, 6014, 6098 only). Designed so a gentle exterior breeze will actually
funnel into the vents and force air to move through the tent. Positioned at the top to help allow heat to
escape on a hot day. Zip them closed when not needed.
