MDC-1840BB/1841BB/1860BB/1810BB/1820BB Series Chapter 6
Using The Menu
Operation Manual
93142122-07
6-9
6.2.3.1 STAB (Screen stabilizing Mode)
Indication Meaning
Selection
STAB
Stabilizing
Mode
SEA, GND
6.2.3.2 PLOT MODE (Plotting Mode)
Indication Meaning
Selection
PLOT MODE
Plot
Mode
EPA, ATA
In this radar series, the Electronic Plotting Aid (EPA) function is installed as standard,
while the Automatic Tracking Aid (ATA) unit is an optional item. To use the ATA
function, the ATA module (PCB based) must be installed inside the processor unit.
6.2.3.3 TARGET ALL CLEAR (Plotting Target All Clear)
Using this function, all target plots can be cleared. To do so, highlight the “TARGET
ALL CLEAR” sign and press the ENT key.
Indication
Meaning
Selection
TARGET ALL CLR
All plotted targets cleared
None
6.2.3.4 ID DISP (ID Number Display)
When this item is set to ON, the target number is indicated beside the target symbol
mark.
Indication Meaning
Selection
ID DISP
Target ID Display
OFF, ON
6.2.3.5 OUTLINE DISP (Outline Data Display)
When this item is set to ON, the course and speed data for 10 targets are indicated at
the data display area.
Indication Meaning
Selection
OUTLINE DISP
10 Target Data Display
OFF, ON
6.2.3.6 AIS (Automatic Identification Systems) Data Display
This function is available on option basis. For operating details, refer to Para. 6.8
“Operating the AIS.”
6.2.3.7 Navigation Display, Map function
Indication
Meaning
Selection
To use the EPA and ATA functions, the bearing and speed information
must be applied from an external bearing/speed sensor.
CAUTION:
