Koden KSD-1100, Operation Manual, Page: 56 / 98

Chapter 2 Operation and Setting KSD-1100/1210
0093107081-00 2-28
2.3.2.7.6 My Data
Click "My Data" to enter the My Data Settings page. The specific settings are shown below.
[1] NAVI Data Display Scale: Set the navigation data to display the level and switch on the chart, setting
items, Close / 25nm / 10nm / 5nm / 3nm / 1nm / all.
[2] NAVI Data Display contents: Set navigation data to display symbols, names, symbols and names on
the chart, setting items, symbol / symbol & ID / symbol & name / symbol & ID & name.
[3] Track Display Scale: Set the track display level and master switch on the chart, setting items, Close /
25nm / 10nm / 5nm / 3nm / 1nm / all.
[4] Track Display contents: Track display content, set the track to display symbols, names, symbols and
names on the chart, setting items, symbol / symbol & ID / symbol & name / symbol & ID & name.
[5] Plot Data Display Scale: Plotting data display level, set the plotting data display level and switch on
the chart, setting items, Close / 25nm / 10nm / 5nm / 3nm / 1nm / all.
[6] Plot Data Display contents: Set the plotting data to display symbols, names, symbols, and names on
the chart. Setting items, symbol / symbol & ID / symbol & name / symbol & ID & name.
2.3.2.7.7 Window button
Open or close the [CHART] page window buttons, including upper left data information window, upper
right data information window, lower left data information window, lower right data information window,
full, measure, center, track and TX/RX signal indicator.
2.3.2.7.8 Advanced settings
[1] Cursor view content: Including data info operation items and operation items. When "Data
Information and Operation Items" is selected, the selected data number and name and operation item
cursor information will be displayed when operating on the chart. When "Operation items" is selected,
when operating on the cursor on the chart, only the operation items are displayed, and the number and
name are not displayed.
[2] Cursor auto hide: The time for automatically hiding the chart cursor can be set, including no hiding,
10 seconds, 30 seconds, and 60 seconds for setting.
[3] Cursor line display: After the cursor line is closed, the connection line between the ship and the
cursor will not be displayed.
[4] User map display: User map display switch.
[5] User map data setting: User map data can be imported according to user's requirements. User can
choose to use map of data which is imported to equipment or use microSD card map data directly.
Copy the mbtiles format file of the user map to the microSD card, insert it into the microSD card slot,
click [user map data setting] to select the layer file, and click [Confirm] to display the layer on the
[CHART] page.