Koden KSD-1100, Operation Manual, Page: 43 / 98

KSD-1100/1210 Chapter 2 Operation and Setting
0093107081-00 2-15
[2] Click [Delete] to exit the operation of adding waypoint.
[3] Click [Cancel] to exit the point editing state and return to Figure 2.4 (b).
Figure 2.5 (a) point edit page Figure 2.5 (b) Symbol edit page
Enter the point edit window, you can edit the attributes of the new point, including the following
contents.
[1] Select the data type as waypoint.
[2] Clicking on the symbol icon will pop up the symbol editing window shown in Figure 2.5 (b). There are
48 icons and 6 colors for waypoint settings.
[3] Click the lock icon to set to lock or unlock the newly created waypoint data. The locked point cannot
be deleted directly.
[4] Click the heart icon to set the focus or not to focus, and the focused waypoint will be placed in front
of the list.
[5] Click on the name edit to enter the waypoint name.
After editing the waypoint, you can choose to save, save and navigate or back to the [CHART] page,
the details are as follows.
[1] Select [Save] to save the new waypoint to the navigation data list.
[2] Select [Save and Navigate] to save the new waypoint and start navigating with that point as the
destination.
[3] Select [Back] to cancel editing, the waypoint will not be saved.
[4] On the [CHART] page, click on the waypoint to be edited to perform [Edit], [NAVI] or [Delete]
operations, as shown in Figure 2.6.
Figure 2.6 Waypoint edit page