Chapter 1 Installation
KGC-222
1-6
0093822202-01
Caution: In the case of mounting the display unit on the table, some maintenance
space is required for cabling, connector access, fuse replacement, fastening of
bolts, etc. as shown in the following illustration.
Flush mounting
(1) Make a square hole at the location to be installed.
(2)
Loosen two (2) fixing knobs that fasten the Display unit onto the mounting bracket.
The bracket and knob bolts are no longer used.
(3) Install the Display unit on the Flush mount kit and fix it with two (2) slotted-head screws.
(4) Connect the connectors for power, DATA, and antenna to the Display unit respectively.
(5) Install the Display unit in the installing location (square hole) and fix it with four 4mm
tapping screws. (Prepare 4mm screws suitable for thickness of installing location.)
Maintenance space
Front
Unit: mm
Unit: mm (inch)