Koden KDS-1100, Operation Manual, Page: 22 / 46

Chapter 1 Basic Operation KSD-1100/1210
0093107083-01 1-4
[5] AIS ship information display mode: Specific display modes can be selected, including
custom, auto and simplified display, custom display mode, self-definable display AIS
information display content, auto display, according to the size of the display window adjusted
to streamline the display of ship name, course and speed, simplified display, only display the
name and speed of the ship.
[6] Information display content: The information display content is displayed only when the
AIS ship information display mode is set to the custom mode. The display contents can be
selected, including MMSI, Ship name, Nationality, National flag, Course, Heading, Bearing,
Speed, Distance, DCPA, TCPA, and latest update.
1.3.2.6 My Data
Click "My Data" to enter the My Data Settings page. The specific settings are shown below.
[1] NAVI Data Display Scale: Set the navigation data to display the level and switch on the
chart, setting items, Close / 25nm / 10nm / 5nm / 3nm / 1nm / all.
[2] NAVI Data Display contents: Set navigation data to display symbols, names, symbols, and
names on the chart, setting items, symbol / symbol & ID / symbol & name / symbol & ID &
name.
[3] Track Display Scale: Set the track display level and master switch on the chart, setting
items, Close / 25nm / 10nm / 5nm / 3nm / 1nm / all.
[4] Track Display contents: Track display content, set the track to display symbols, names,
symbols and names on the chart, setting items, symbol / symbol & ID / symbol & name /
symbol & ID & name.
[5] Plot Data Display Scale: Plotting data display level, set the plotting data display level and
switch on the chart, setting items, Close / 25nm / 10nm / 5nm / 3nm / 1nm / all.
[6] Plot Data Display contents: Set the plotting data to display symbols, names, symbols, and
names on the chart. Setting items, symbol / symbol & ID / symbol & name / symbol & ID &
name.
1.3.2.7 Window button
Open or close the chart page window buttons, including upper left data information window,
upper right data information window, lower left data information window, lower right data
information window, full, measure, center, track and TX/RX signal indicator.
1.3.2.8 Advanced settings
[1] Cursor view content: Including data info operation items and operation items. When "Data
Information and Operation Items" is selected, the selected data number and name and
operation item cursor information will be displayed when operating on the chart. When
"Operation items" is selected, when operating on the cursor on the chart, only the operation
items are displayed, and the number and name are not displayed.