Troubleshooting
www.kodak.com/go/support
50
Picture quality problems
Status
Cause
The picture is too dark or
underexposed
■
Use Fill flash (
page 16
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is within
the effective flash range (
page 16
).
■
To automatically set exposure and focus, press the Shutter
button
halfway and hold
. When the ready light glows green,
press the Shutter button
the rest of the way down
to take
the picture.
■
Decrease the shutter speed or increase the ISO speed (
page 14
).
The picture is too light
■
Turn flash off (
page 16
).
■
Move so that the distance between you and the subject is within
the effective flash range (see
page 16
).
■
To automatically set exposure and focus, press the Shutter
button
halfway and hold
. When the ready light glows green,
press the Shutter button
the rest of the way down
to take
the picture.
■
Increase the shutter speed or decrease the ISO speed (
page 14
).
The picture is not clear
■
To automatically set exposure and focus, press the Shutter
button
halfway and hold
. When the ready light glows green,
press the Shutter button
the rest of the way down
to take
the picture.
■
Clean the lens (
page 57
).
■
Make sure camera is not in Close-up mode if you are more than
27.6 in. (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod.
