Kodak V1003 - EASYSHARE Digital Camera, Manual

Page: 105 / 140

KODAK EASYSHARE V803/V1003 Zoom Digital Camera Manual
Slide Show does not run on an
external video device
●
Adjust the camera Video Out setting to NTSC or PAL
(
).
●
Make sure the external device settings are correct.
(See the device's user's guide).
Computer does not communicate
with the camera
●
Make sure the battery is charged and installed
correctly (see
Loading the KLIC-7003 battery ).
●
Turn on the camera.
●
Make sure the USB cable model U-8 is connected to
the camera and the computer (see
Using the USB
cable ). (If using an EasyShare dock, check all cable
connections. Make sure the camera is seated on the
dock.)
●
Make sure EasyShare software is installed (see
Installing the software ).
Picture quality problems
Status Solution
Picture is not
clear
●
To automatically set exposure and focus, press the Shutter button
halfway . When the framing marks turn green, press the Shutter button
completely down to take the picture.
●
Clean the lens (see Care and maintenance ).
●
Make sure the camera is not in Macro mode if you are more than 27.6 in.
(70 cm) from your subject.
●
Place the camera on a flat, steady surface or use a tripod (especially in
high-zoom settings or in low light).
Picture is too dark
●
Reposition the camera for more available light.
●
Use Fill flash (see Using the flash ) or change your position so light is not
behind the subject.
●
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on see
Camera
specifications .)
●
To automatically set exposure and focus, press the Shutter button
halfway . When the framing marks turn green, press the Shutter button
completely down to take the picture.
http://www.kodak.com/global/en/service/publications/urg0...ml?chapsec=urg00665c6s0&pq-path=10/3905/7168/10510/10540 (3 of 4)19/01/2007 16:36:56