www.bbhscanners.com
73 of 142
Cleaning Inside the Scanner
If paper jamming, marking, or multiple-sheet feeding occurs frequently, clean the rollers, sensors and
double feed detector as described in this section. To maintain scanning quality, clean the scanner
components frequently: Clean inside the scanner at least once per week or after 20,000 sheets have been
scanned, whichever comes first.
To determine the number of sheets scanned, use the
Tr
ū
per User Utility. (See
“Tr
ū
per User Utility” on
page 92
.)
The following guidelines are for cleaning inside the scanner:
•
If the documents you scan are dirty, the scanner’s parts and components will also become dirty.
Be sure the documents you scan are as clean as possible.
•
If black or white lines appear on the scanned images, clean the ADF glass areas and the
reference plates as described in
“Cleaning the Background Color Reference Plates and ADF
Glass” on page 81
.
•
If paper jamming, marking, or double feeding occurs frequently even after cleaning, you may
need to change the rollers, as described in
“Replacing Consumables” on page 86
.
Also observe the warnings for use of the roller cleaning paper shown in
“Roller Cleaning Paper” on
page 74
.
Â
Note
For proper cleaning and maintenance, it is recommended that the following three roller cleaning
procedures be performed concurrently.
